Added basic WebSocket Functionality

vesper/config.h

@@ -1,17 +1,48 @@
-const char* ssid     = "SmartNet";
-const char* password = "smartpass";
+#pragma once
+
+#define DEV_ID "PC201504180001"
+
+// Network Config
+const char* ssid     = "SmartNet";    //Not used with WiFi Manager
+const char* password = "smartpass";   //Not used with WiFi Manager
 const char* hostname = "ESP32_mqtt_test";
-
-const IPAddress MQTT_HOST(10,98,20,10);
-const int MQTT_PORT = 1883;
-
-#define MQTT_USER "esp32_vesper"
-#define MQTT_PASS "vesper"
-
 IPAddress ip(10, 98, 30, 150);
 IPAddress gateway(10, 98, 30, 1);
 IPAddress subnet(255, 255, 255, 0);
+String ap_ssid = String("BellSystems - ") + DEV_ID;
+String ap_pass = "password";
 
-#define DEV_ID "id-96638646"
+// Version Controll Settings
+const char* versionUrl = "http://10.98.20.10:85/version.txt";
+const char* firmwareUrl = "http://10.98.20.10:85/firmware.bin";
+const float currentVersion = 1.1;
 
-#define PCF8574_ADDR 0x24
+// NTP Config
+const char* ntpServer = "pool.ntp.org";
+const long gmtOffset_sec = 7200;
+const int daylightOffset_sec = 3600;
+
+// MQTT Config
+const IPAddress MQTT_HOST(10,98,20,10);
+const int MQTT_PORT = 1883;
+#define MQTT_USER "esp32_vesper"
+#define MQTT_PASS "vesper"
+
+// Hardware Configuration
+#define PCF8574_ADDR 0x24
+
+
+// SPI W5500 ETHERNET SETUP
+#define USE_TWO_ETH_PORTS 0
+
+#ifndef ETH_PHY_CS
+#define ETH_PHY_TYPE ETH_PHY_W5500
+#define ETH_PHY_ADDR 1
+#define ETH_PHY_CS   5
+#define ETH_PHY_IRQ  -1
+#define ETH_PHY_RST  -1
+#endif
+// SPI pins
+#define ETH_SPI_SCK  18
+#define ETH_SPI_MISO 19
+#define ETH_SPI_MOSI 23